Articles » Video » Copper Pan Spinning Process: How Copper Pans Are Made (Video)

Copper Pan Spinning Process: How Copper Pans Are Made (Video)

Copper Pan Spinning Process: How Copper Pans Are Made (Video)

Short answer: A copper pan is made in six steps: 99.9% copper sheet is cut to a disc, spun on a lathe into the shape of a pan, hand-hammered to harden and texture it, fitted with handles, cleaned and polished, and finally lined inside with lead-free pure tin. The video below shows the spinning step in our Kahramanmaraş workshop.

How Are Copper Pans Made? Six Steps

1. Cutting the sheet

We start with 99.9% copper sheet, 1–1.5 mm thick depending on the size of the pan. The sheet is cut into a disc larger than the finished pan, because the walls are drawn up from that disc.

2. Spinning

The disc is clamped to a spinning lathe. As the form turns, the craftsman presses the copper over it step by step with a spinning tool, forming the base and the walls. Spinning shapes the copper gradually instead of in one press stroke, so the walls keep their thickness. This is the step in the video.

3. Hand hammering

The spun pan is hammered on an anvil. Hammering compacts and work-hardens the copper, so the pan holds its shape, and it gives the surface its texture. Every mark comes from the hand, so no two pans are identical. The base, which carries the heat, is left thicker than the rim.

4. Handles

Two handles for a serving pan, or a long handle for an egg pan or sauce pan. Handles are brass or copper and are fixed firmly, because the pan goes through tinning heat and years of fire and water.

5. Cleaning and polishing

Oxide and marks from hammering are removed and the outside is polished to bright copper. On fully tinned pans, the outside is tinned too.

6. Tinning

The inside is lined with lead-free pure tin: the pan is heated, sal ammoniac flux is applied, molten tin is wiped over every surface by hand, and the pan is quenched in cold water. The full process is in how to tin a copper pan.

Spun and Hammered vs. Stamped

Step Done properly Done cheaply
Sheet 1–1.5 mm; even heat 0.5–0.8 mm; hot spots, warping
Forming Spinning keeps wall thickness Stamping thins and weakens the rim
Hammering Work-hardened, long life Machine pattern; copper stays soft
Handles Brass or copper, firmly fixed Thin sheet, spot-welded; works loose
Lining Lead-free pure tin Leaded tin or no lining

You can check these differences yourself with the tests in how to tell if copper is real, and compare makers in best copper pan brands.

Made in Kahramanmaraş Since 1986

Kahramanmaraş is one of Anatolia's old copper-working centers, where spinning, hammering and tinning are still passed from master to apprentice. Moda Bakır has made copper there since 1986: Ramazan Usta shapes the sheet and Hayri Usta does the tinning. Our pans and sets are in the copper frying pans and egg pans collection; see the workshop on our about page, and for restaurants and retailers, our wholesale copper page.

Frequently Asked Questions

How are copper pans made?

Copper sheet is cut to a disc, spun on a lathe into a pan, hand-hammered, fitted with handles, polished and lined inside with lead-free pure tin.

How thick is the copper in a handmade pan?

Our pans are made from 1–1.5 mm 99.9% copper sheet; larger pans use the thicker sheet.

What is copper spinning?

Pressing a copper disc over a rotating form with a spinning tool, step by step, until it takes the shape of the pan without thinning the walls.

Is hand-hammered copper better than stamped?

Hammering work-hardens the copper and leaves the base thicker, so the pan keeps its shape. Stamped pans are evenly thin and bend more easily.

Why is a copper pan lined with tin?

Bare copper should not touch acidic food. Lead-free pure tin forms a barrier between the food and the copper and can be renewed when it wears.

Where are Moda Bakır copper pans made?

In our own workshop in Kahramanmaraş, Türkiye, since 1986.

Shopping Comments

You must be a member to add a comment / question.

My Shopping Cart